Skip to content
Civil Tech Services
Insights

Who installs structured cabling in a data centre — and what gets tested?

Specialist cabling contractors install, route, dress and label the cabling for the integrator or operator that owns the deployment. CTS installs MPO-12 APC fibre, MPO-LC, LC-LC single-mode and Cat6A copper to Red and Blue path diversity. Links are tested with Fluke and OTDR equipment and handed over in as-built documentation.

Who installs it

Specialist cabling contractors install it for the integrator or operator that owns the deployment. The contractor installs, routes, dresses and labels the cabling.

What goes in

CTS installs MPO-12 APC fibre, MPO-LC, LC-LC single-mode and Cat6A copper. MPO-12 is a multi-fibre connector that carries twelve fibres, and APC is an angled polish that reduces back-reflection. MPO-LC links a multi-fibre connector to individual LC connectors. LC-LC single-mode is the patch link for single-mode fibre.

Red and Blue path diversity

Red and Blue path diversity means two separate, colour-coded cable paths, so that a failure on one route does not take out both. CTS builds to it.

What gets tested

Fibre links are tested with an OTDR, which shows loss and faults along the length of a link. Copper links are tested with a certifier such as Fluke. The results are recorded.

What you receive

The work is handed over with as-built documentation, so the installed cabling matches the record.

Planning a deployment window?

Tell us the scope and the window. We’ll tell you how CTS would mobilise.