Data-centre deployment, delivered on program.
CTS mobilises into live data-centre builds as principal contractor for integrators and colocation operators — structured cabling, rack & stack, and smart-hands support.
ISO 9001, 45001, 14001
Certified by DNV.
Mobilises inside deployment windows
Works to the program the integrator or operator sets.
As-built documentation standard
Rack elevation, asset list, serial numbers and port map.
We work as principal contractor for systems integrators, colocation operators, and OEM vendors.
CTS mobilises into your deployment window and works to your program.
Three services, one standard.
Structured cabling
Fibre and copper installed, routed, dressed, labelled and tested. As-built documentation.
Rack & stack
Receive, verify, rail, power and health-check. Documented to rack elevation and port map.
Smart hands / Tier 1 ops
Routine inspection, remote hands, basic troubleshooting, asset and ticket management.
Delivered inside a live GPU deployment.
Structured cabling and rack & stack for a multi-megawatt GPU deployment at a Tier-grade hyperscale facility in Sydney. CTS delivered the scope as principal contractor.



Why CTS.
Construction-grade discipline.
CTS hands over buildings on program to ISO 9001, 45001 and 14001 standards. The same discipline runs inside a deployment window.
Documented to hand over.
As-built documentation for cabling. Rack elevation, asset list, serial numbers and port map for rack and stack.
Scope stated precisely.
We say what is included and what is not. CTS does not install operating systems.
ISO 9001
Quality
ISO 45001
Safety
ISO 14001
Environmental
Certified to the standards integrators and operators require.
Certified by DNV.
Download capability statementQuestions integrators and operators ask.
Do you work as a principal contractor for integrators and colocation operators?
Yes. CTS delivers data-centre scope as principal contractor for systems integrators, colocation operators and OEM vendors, working inside the program the build already runs on.
How fast can a principal contractor mobilise into a hyperscale deployment window?
CTS responds to every enquiry within 24 hours. We then agree the mobilisation against the window the integrator or operator sets, and work to their program. The discipline comes from construction delivery: scope, program and handover documented from the start.
Who installs structured cabling in a data centre — and what gets tested?
Specialist cabling contractors install, route, dress and label the cabling for the integrator or operator that owns the deployment. CTS installs MPO-12 APC fibre, MPO-LC, LC-LC single-mode and Cat6A copper to Red and Blue path diversity. Links are tested with Fluke and OTDR equipment and handed over in as-built documentation.
What does a rack and stack contractor actually do?
A rack and stack contractor receives and verifies equipment, installs rails, connects A and B feed power, and health-checks each unit by LED and by BMC, iDRAC or iLO. The result is documented as a rack elevation, an asset list, serial numbers and a port map. CTS does not install operating systems.
What's the difference between smart hands and remote hands?
The terms overlap, and operators use them differently. Remote hands usually means a customer asks, from off site, for a technician in the facility to do a simple task. Smart hands is the wider on-site support: routine inspection, basic troubleshooting, and asset and ticket management. CTS delivers both as Tier 1 operations.
What certifications should a data-centre cabling contractor hold?
Quality, safety and environmental management certification, at a minimum. CTS holds ISO 9001, ISO 45001 and ISO 14001, certified by DNV.
Planning a deployment window?
Tell us the scope and the window. We’ll tell you how CTS would mobilise.